20 replies to this topic

[spridget]

I bought the 94A from McMaster-Carr online. A 1qt can will fill two mounts/restrictors. I used aluminum foil tape (a type of duct tape) to seal the bottom. I spread a thin coat of silicone (tire shine, "back to black") on the exposed sticky surface of the tape after it was applied the mount to serve as a releasing agent. I placed the mount on a level surface and poured the mixed 94A into the mount. It does not take long to dry, but takes about 24 hours to fully cure. I've made several of these with different mounts and have never had any problems. The harder 94A will add some noise and vibration especially at lower revs and sitting at idle with the A/C on, but it eliminates wheel hop and engine movement.