Jump to content


Photo

Heater blower motor not working


  • Please log in to reply
2 replies to this topic

#1 davidl49

davidl49

    Junior Member

  • Members
  • 1 posts
  • Vehicle owned:
    1999 contour

Posted 03 December 2011 - 06:18 PM

i have 1999 ford contour. the heater fan was only working on high and then stopped working. i replaced the blower motor resistor which i figured was bad. blower still not working. checked the fuses and replay all looked good. also swapped the reply with another relay to check if bad and still didn't work. how do i determine if blower motor is bad? Thanks!

#2 Aussie Ford

Aussie Ford

    Senior Member

  • Admin
  • 2,027 posts
  • Gender:Male
  • Location:Portland, Orygun
  • Vehicle owned:
    1995 Contour GL 4banger

Posted 04 December 2011 - 03:24 PM

A couple of things to do:
Unplug and remove the fan motor from the housing behind the glove box. Then take a couple of leads and touch the terminals. Brace the motor bfore doing this as there is a lot of torque.

If the motor is good then there is a good chance that it is the fan switch on the dash, or its connector. Both are known to fail.

AF

#3 Delores

Delores

    Member

  • Members
  • 43 posts
  • Gender:Male
  • Location:Chesapeake Beach MD
  • Vehicle owned:
    1995 Contour GL 2.0 ZETEC

Posted 11 January 2012 - 12:48 PM

Pull the panel for the fan switch and inspect the wiring connector and harness for melting.