artzzr Posted October 20, 2014 Share Posted October 20, 2014 hi terry 3l rebuild underway , valves stripped out of heads, going to clean up the ports, and recut the valve seats, from what I see of specs ex valve seat width is supposed to be around 1.5mm , mine all look at least double that anyway what I would like to know is what is the easiest way to remove the old valve stem seals from the heads, as I will fit a new set Link to comment Share on other sites More sharing options...
Terry Haines Posted October 20, 2014 Share Posted October 20, 2014 A wide ,dull blade screwdriver has always worked for me...to lever them off the guide. Link to comment Share on other sites More sharing options...
Recommended Posts