Pieloux Posted December 30, 2018 Share Posted December 30, 2018 I need to replace (for the first time in almost 25 years) the front sway bar bushings. I read somewhere that it is necessary to lower the front subframe in order to remove the bolts. Is it true ? I checked in the 1995 service manual and it is not indicated that you have to lower the front subframe. Has this topic already been discussed in this forum ? Link to comment Share on other sites More sharing options...
BuckeyeSVT Posted December 30, 2018 Share Posted December 30, 2018 I think clearance is going to be your biggest issue getting to the 4 mount to subframe bolts. I normally service them when I drop the subframe, however there may be enough room to slide a 13mm in there to get the bolts loose. It won't be an easy job though with the firewall right up against the lower bolts. -Dominic Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now