Pieloux 1 Report post Posted December 30, 2018 I need to replace (for the first time in almost 25 years) the front sway bar bushings. I read somewhere that it is necessary to lower the front subframe in order to remove the bolts. Is it true ? I checked in the 1995 service manual and it is not indicated that you have to lower the front subframe. Has this topic already been discussed in this forum ? Share this post Link to post Share on other sites
BuckeyeSVT 78 Report post Posted December 30, 2018 I think clearance is going to be your biggest issue getting to the 4 mount to subframe bolts. I normally service them when I drop the subframe, however there may be enough room to slide a 13mm in there to get the bolts loose. It won't be an easy job though with the firewall right up against the lower bolts. -Dominic Share this post Link to post Share on other sites