Corvander

I am using advance auto fluid

hello my 95 2.0 auto trans hesitates and shifts real hard from first to second I replaced the transmission and it does the same thing?

hello I have a 95 contour 2.0 and the radio does not turn on, the fues looks good. what should i check next

hello 95 2.0 auto here. I finally got it running but it runs rough and wants to stall out. feels like its getting to much fuel cause I can feel it getting in my eyes when I'm leaning over the motor. I believe I am am getting a tp code 167. when I pull the air box of the tb it raises up and sounds good for a second but them runs like crap?

I did not pull the whole engine only he trans. that ground was never touched and is still connected

sorry but what is pas res?

where is the connector at the eec module and ground? I checked the big one on the shock tower with the bolt its connected

no I did not pull the engine. I have been over the connectors many times there are only so many and all are connected. from what I can remember there are 4 grounds one by the rear mm one on the tranny under the battery and 2 near the fuse box which are all connected

hello everyone, I have a 95 contour 2.0 auto that I replaced the transmission on. Now the car will not start at all cranks over fine, I got it to puff one or twice while spraying starting fluid but nothing happens. I replaced the crank sensor with a new one. It is putting out about 1.5 v while cranking so I believe it is working but i am not recieveing the signal at the ignition module on the firewall. I am also getting code 16 which is idm no signal? the fuel pump turns on and I have pressure at the sharder valve but no voltage at the injectors. I have no idea what to do now. The trans I put in seemed to be from a newer contour because I had to swap the speed sensor. please help